If you’re often on the road, you know how much of a hassle it is to travel across cities, provinces, and even regions. With traffic a constant problem in the Philippines, expressways are almost heaven-sent. Almost—because even they get clogged at toll plazas.
Enter the radio-frequency identification or RFID. This technology facilitates cashless transactions at toll gates, significantly reducing time spent queueing and paying for expressway toll fees.
Read this quick guide to learn what Autosweep RFID is and how to install and use it.
Photo: Toll Regulatory Board (Facebook)
Autosweep RFID is one of the primary RFID systems used in major expressways in the Philippines. Here’s where to use Autosweep RFID:
Autosweep and Easytrip are similar, but not the same. Both RFID systems provide contactless and cashless payments in major tollways in the Philippines.
However, Autosweep is for tollways managed by the San Miguel Corporation (SMC), while Easytrip is for those under the Metro Pacific Tollways Corporation (MPTC).
To better visualize which RFID system is accepted where, see the table below:
“Can I use Autosweep RFID in NLEX?” Yes, you can enroll Easytrip stickers to Autosweep and vice versa. This means you can now use Easytrip at SMC Tollways such as SLEX, Skyway, Star, TPLEX, and NAIAX; and Autosweep at MPTC Tollways such as NLEX, SCTEX, CAVITEX, and others.
However, note that only the new Easytrip stickers with Neology tags can be scanned/read by the Autosweep system, so make sure to update your sticker first. Next, take the following steps to register your Easytrip RFID to Autosweep:
Meanwhile, here's how to register your Autosweep RFID to Easytrip:
There are many Autosweep RFID installations in and out of the metro. Here are some of them:
📍 SLEX
📍 Skyway
📍 NAIAX
📍 STAR
📍 TPLEX
There are two types of Autosweep RFID cards: Autosweep To Go (ATG) and Autosweep Premium.
You can enroll only one vehicle per ATG card number or account, while you can enroll multiple vehicles with one account for Autosweep Premium. While the ATG card application requires only a filled-out subscription form, there are more Autosweep RFID requirements for premium accounts.
Here’s a quick list of the requirements for each Autosweep RFID type:
Filled-out Autosweep To Go Subscription Form
If the vehicle is not under the name of the subscriber, prepare the following documents:
The Autosweep registration process is fast and easy. Since Autosweep RFID stickers are free, you don't need to shell out extra money for registration. There’s just an initial load requirement depending on your vehicle type, but that’s consumable.
How much is an Autosweep RFID? Class 1 vehicles (i.e., cars, jeepneys, vans, pick-ups, and motorcycles) must have a minimum initial load of ₱200. Class 2 vehicles (i.e., buses and light trucks) and Class 3 vehicles (i.e., large trucks with or without trailers) must load up at least ₱1,000.
You can get an Autosweep To Go card at Autosweep RFID installation sites in just five minutes. Follow these steps to complete your application:
Autosweep Premium cards are available only at Autosweep RFID customer service centers. Getting one can take up to 15 minutes.
Get familiar with the steps below before heading to your nearest Autosweep RFID locations:
Wondering, "Can I get an Autosweep RFID online?"
All the forms you need to create an account with Autosweep can be found online. The Autosweep website has a specific page for downloadable forms.[5] However, there’s no Autosweep online registration yet, so you must go on-site to process your application.
Simply breeze through the toll gates of expressways, and the scanner will read your RFID sticker. If the scanner can’t read the sticker, present your Autosweep card to the teller in the toll booth. You may also report the incident to the Autosweep hotline at (02) 5-318-8655 (TOLL) or email customercare@autosweeprfid.com.
For other comments and/or suggestions, submit a customer care form through the website.[6]
Wondering where to load your Autosweep RFID? There are three primary ways to complete your Autosweep RFID reload: over-the-counter, online channels, and kiosks.
To top up your Autosweep balance, use the different payment methods outlined below:
Topping up your Autosweep account is a straightforward process. Just present your RFID card to any reloading site located in select gas stations and bills payment centers and pay for your load:
You can add balance to your Autosweep account via the following online banking channels and e-wallets:
Use the following kiosks to top up your account:
For Autosweep RFID reload via GCash, follow these simple steps:
To load your RFID at 7-Eleven, follow the steps below:
If you don’t have the CLiQQ app, fret not. Just proceed to any 7-Eleven store with a working CLiQQ kiosk and follow the steps above.
To make reloading more convenient, use Autosweep’s auto-debit arrangement (ADA) to connect your credit card to your account. Fill out and submit the Authorization to Use and Charge Credit Card Form,[7] along with photocopies of your credit card and valid IDs, to any Autosweep RFID station.
With ADA, you can set the automatic replenishment amount and the threshold amount. You can choose the minimum, which is ₱500, or specify a different amount.
If you're often on the road, get a gas credit card. Use any of these to reload your Autosweep RFID via credit card:
Autosweep RFID load does not expire. When you reload from partner merchants, you may ask for official receipts, which will be sent to your registered email within a day or two. Contact the Autosweep hotline for support if you fail to receive your receipt.
Always check your Autosweep RFID load balance. Class 1 motorists entering electronic toll collection (ETC) gates are advised to have at least ₱100 in their account after toll fee deduction to adhere to the ₱100 Autosweep maintaining balance.
Here's how to check your Autosweep balance:
Send a text message using your Autosweep-registered mobile number and plate number.
You can also view your balance through the Autosweep RFID mobile app for iPhones and Android devices.
You can also check your Autosweep balance through the Autosweep RFID website:
To check your Autosweep RFID SOA, log in to the Customer Web Portal to generate and download your Statement of Account.
Further reading:
TRB's dry run of cashless toll collection is currently in effect, so make sure you have enough in your balance to cover Autosweep RFID toll rates.
Here are the participating Autosweep toll plazas:[8]
TRB plans to include all toll plazas in the cashless dry run by June 2024.[9]
How to transfer Autosweep load to another account? You can't—because an RFID card contains the owner’s vehicle plate number and account number. You can’t borrow another user’s card or lend your card to others to pass through toll plazas.
If you’re selling your vehicle or handing it down to someone else, remove your Autosweep RFID sticker and surrender your Autosweep RFID card to any Autosweep RFID station.
If you lose your card or if the sticker gets damaged or becomes unreadable, you can get an Autosweep RFID replacement. Go to any Autosweep RFID station, fill out the RFID Sticker Replacement form, and pay ₱200 as a sticker replacement fee.
You'll need to fill out a customer request form asking for the termination of the sticker and card. Reach out to customercare@autosweeprfid.com or visit any Autosweep RFID station to get a printed copy.
Now that you know what Autosweep RFID is, don’t you think it’s a must-have if you use your vehicle to commute to work and go on road trips? With the continuous surge of contactless payments, you shouldn’t miss out on the safety and convenience that the Autosweep RFID offers.
Also, getting the right insurance coverage for your car is just as important! Looking to renew your policy or switch to a different provider? Save time and money: Get a free quote from Moneymax below!
Sources: